It s time again for my favorite holiday and ridiculous costume making! Even though it is Halloween, Chris and I decided to borrow a couple Christmas characters this year. My all time favorite Christmas movie is Rudolph the red nosed reindeer (the stop motion animation, not the cartoon) and the Bumble is by far the coolest character, Yukon Cornelius is a close second 😉 I figured we could double up and make some fun Christmas cards with the photos in a couple months.
See the resemblance? These were actually pretty easy costumes to make. I made pajama pants with an elastic waist out of white furry fleece from joanns. I just used an old pj pant pattern I have had forever, pj pants are so easy and comfy I really should make some flannel ones for the winter. For the top, I just used a long sleeved shirt in my drawer as a pattern and sewed it up super quick. I serged all the seams inside so that it wouldn’t be itchy from the fur edges.
Obviously the Bumble head was the challenging part, but I got him put together in just a day. I started with a cheapo hat that had a brim, and I glued blue felt around the mouth area. Then I cut two pieces of the furry fleece, each big enough to stuff with polyfil and stand up, I glued these on the brim as well. Then I stuffed them full (well, not TOO full- it was kind of heavy!) and sewed the head closed. His face is a piece of foam with blue felt glued on and white felt for the eyes. His nose is another smaller piece of foam with blue felt t give it dimension. I sewed this piece on the head, and glued on white felt teeth. Voila! The Bumble was born!
Yukon Cornelius was much easier, mostly because i didn’t have to make most of it. We just found an old blue jacket in Chris’s closet, and I had a black elastic belt. I made his ice pick out of cardboard and duct tape (very fancy) and found a toy gun at the dollar store. His beard is actually crocheted, I found this free pattern online and my mom crocheted it up. She modified it by making his mustache longer with some wire to make it stand up, and she made a red hat with ear muffs to attach to the beard. I think it turned out great, it was pretty hilarious!
We wore our costumes to a party at glassworks, and we had a total blast! Now that Halloween is over, I am hoping to get in some regular sewing time, my school schedule has been very time consuming so far this year and sewing has been put on hold out of pure exhaustion. Who’s ready for Thanksgiving break? This gal!
The In-Law’s Halloween party, disappointing it was not! Oh yes, this year Chris and I (and the dog) did a star wars theme. All the hub’s idea of course! I didn’t want to do the traditional played out Princess Leia with the cinnabuns and Chris only wanted to choose from the original cast characters so I decided that Yoda was the only way to go. Chris chose the rebel flight suit that Luke Skywalker wore, and I left Princess Leia for Harper to wear.
Yoda’s head was relatively easy to make compared to some of my past costumes. I took a beanie and sewed green fleece around the edges and stuffed it full with polyfil. I glued on small styrofoam balls cut in half for each eye and then flued on his featured with leftover green fleece and felt I had in my stash. His ears were shaped with pipe cleaners and sewed into the seams of the head. I used a robe pattern to make his hooded robe, and I made Yoda feet with foam and extra fleece.
I found some “furry” yard to use for Yoda’s hair on the back of his head. I made sure to leave a sheet of fleece around the bottom with a tie so that it would stay on my head all night.
For Chris’s rebel flight suit I used a jumpsuit pattern from and old Halloween costume pattern his mothe had for a lion. I added the cargo pockets on the legs and the arms. The vest I used some white muslin I had in my stash and I pinned it into “shutters” to create the ridged effect Luke’s vest had.
I left him in charge of the box and gears Luke wore in front, he went to home depot and got plastic tubing, duct tape, and gray spray paint and piece everything together on a tubberware container he paint sprayed.
For Harper’s costume, I used the pattern from her doggie jail suit last year but just used white cotton. I made a belt and added on Princess Leia’s silver details with some leftover scraps of metallic silver material I had from a previous Halloween. I used brown felt and a glue gun and just rolled up some cinnabuns and sewed an elastic chin strap to the bottom.
The party was so much fun, and my Yoda ended up winning the costume contest! There was also a contest for the best Halloween appetizer and the best carved pumpkins. Here are some of the crazy food platters, the first three I made.
Powdered donut hole eyeballs. The irises are melted white chocolate with green and blue food coloring, the pupils are chocolate chips and the blood vessels are red gel.
These are little witches hats I made with chocolate cookies, icing, hersheys kisses, and sprinkles.
These are bloody bandaids, made with graham crackers, cream cheese and strawberry jam.
Here are some of the spooky foods my Mother In Law put together; pumpkin barfing guacamole, and a table full of goodies like pretzel witch fingers, carmel peanut grapes, ghost nutter butters and Franestein and lily’s special brew.
There were so many fantastic costumes including the cereal character gang, Captain crunch, the Trix rabbit, Luck charms and Toucan Sam, as well as Carme San Diego and the USA volley ball team. Two nights before the party we had a pumpkin carving extraganza and carved about 20 pumpkins, it was extreme!
This one was carved by my friend Jackie, she used a potato pealer and some other tools to shave this into an amazing skull. Obviously she won the pumpin carving contest!
More Halloween festivities to come, hope you all have a spooktacular holiday!
It is finally my most favorite time of the year when I get to break out the hot glue gun and create the most ridiculous costumes to wear out in public with my crunk friends! I am a huge Halloween freak >:) Many of my friends recruit me to make them costumes and this is my first round, gotta start early!
My friend Katie and I have been obsessed with the Justin Timberlake’s skit Omeletteville on SNL (circa 2003) in which two neighboring breakfast joints Benny’s and Omeletteville go head to head. Its pretty hilarious, definitely Hulu it if you haven’t seen it. Anyhow, after watching this skit about 100 times Katie finally said, Eureka! This would be an awesome Halloween costume! And she and her fiance’s Halloween fate is now sealed. Obviously she is making him be “Benny’s bacon”
For my plan of attack I immediately thought… foam! You can get 2.5 yard rolls of this foam at Joann’s for $10 a yard, however I used 50% coupons. To make the omelette I cut one in half and sewed it together by hand with heavy duty thread. Then I cut the edges off to round it out into an omelette shape.
Since Justin’s head came through the side of the omelette I held it up to my husband to judge where to cut the holes for her head and her arms. The seam to close it would be the “fold” in the omelette where the cheese would be oozing out.
After getting everything cut out the next step was a lot of felt and a whole lotta hot glue. You can buy felt by the yard and get a ton of it for really cheap. It also appears that the bolts for felt are really huge too- bigger than 60″ but maybe I am imagining that- perhaps I should ask next time! I got yellow for the omelette, I just laid the felt out flat and put the foam on top and just started gluing away. I didnt have much of a strategy except around the holes I cut the felt in wedges like a pizza to curl them around the edges and then just filled in the blank spots with extra. I added some felt to the inside of the omelette where her head popped out so you wouldn’t see the green inside.
Once all the yellow felt was glued on I used the scraps I cut off to make the cheese. I sewed these together into a strip with humps to resemble the cheese melting out, and I hot glued orange felt on these. I then sewed the cheese to the two sides of the omelette to close the seam.
I made the four finger white gloves with white felt on my sewing machine. Here is the final product- sorry for such a grainy photo, this is with my phone, and I am wearing boxer shorts and tank top underneath for the record!
The Benny’s bacon costume was built in the same way. I started with foam but measured it out into 4 strips, the front and back being wider. I held these up to Chris to mark where to cut the holes for the head and arms.
Next I glued on all the felt like I did for the omelette only it took muuuuuuch longer, I cut red and brown felt into wavy strips to look like fat running through the bacon strips. After covering the foam with all the felt I sewed the four pieces together into a block. For the eggs over easy I cut egg shapes and glued white felt to those as well, and made yellow yolks to glue in the middle. The best part about this Benny’s bacon costume is that it is fully funstional. If you have watched the skit there is a point where they get into a physical fight and Justin rips off the top egg leaving him with two eggs on the bottom that resemble… umm the nether region. I just added velcro to the top egg so that Katie could rip off the top egg as in the real skit.
Here it is! I will be sure to add pictures of Katie and her fiance Chris when they rock these out on Halloween with tights and the full get up.
This year my husband and I are going to be the Coyote and Roadrunner, right now a work in progress. More Halloween fun to follow!